Trang chủ Quản lý nhà nước Hoạt động triển khai Tạp chí KHCN xây dựng English

Giới thiệu sản phẩm

Phần mềm tự động hoá thiết kế nhà cao tầng PKPM VNBC: PKPM-VNBC là phần mềm tự động hoá thiết kế kết cấu công trình bê tông cốt thép, đặc biệt chuyên dụng cho nhà cao tầng, theo tiêu chuẩn Việt Nam. Đây là thành quả của chương trình hợp tác trong năm 2004 và 2005 giữa 3 bên: Viện hàn lâm xây dựng Trung Quốc CABR (China Academy of Building Research), Viện khoa học công nghệ xây dựng IBST (Institute of Building Science and Technology) và công ty Tin học Xây dựng CIC (Construction Informatics Corporation).

Các công trình thiết kế mới
Số người truy cập: 1052954
Số truy cập hiện tại: 17
(Thứ Tư, 03/10/2007-3:40 PM)
Tạp chí KHCN Xây dựng số 2/2007

PGS.TS. Cao Duy Tiến, TS. Vũ Thị Ngọc Vân: Viện KHCN Xây dựng với công tác biên soạn tiêu chuẩn xây dựng Việt Nam theo hướng hội nhập Quốc tế

KS. Cao Văn Hà: Giải pháp nâng cao hiệu quả quản lý chất lượng công trình xây dựng

GS.TSKH. Nguyễn Đăng Bích , KS . Lê Khánh Linh: Một số vấn đề nghiên cứu trong biên soạn tiêu chuẩn thiết kế công trình chịu động đất TCXDVN 375:2006

TS. Ngô Văn Hợi: Công tác trắc địa trong xây dựng đường hầm

ThS. Hoàng Anh Giang: Các thử nghiệm đốt đối với vật liệu và bộ phận công trình và việc áp dụng ở Việt Nam

TS. Trần Minh Đức, KS. Bùi Thị Nghị: Tìm hiểu bản chất và khả năng cải thiện chất lượng sơn truyền thống

TS. Hoàng Thị Bích Thủy, KS. Phạm Ngọc Hiệu: Ảnh hưởng của nồng độ ion clo, độ ẩm và chiều dày bê tông đến quá trình ăn mòn cốt thép

TSKH. Trần Mạnh Liểu: Đặc điểm thông tin địa chất và khả năng sử dụng các mô hình xác suất trong nghiên cứu tai biến địa chất

ThS. Lại Hải Đăng, ThS. Lưu Trường Văn: Mô phỏng tiến độ thi công công trình bằng phương pháp Monte Carlo

ABSTRACT

Institute for Building Science and Technology with the development of Vietnam building standards according to the tendency of International integration (pp.3-5).

A/Prof. Dr. cao duy tien, Dr.Vu thi ngoc van

In this paper, the authors introduce the development ofsome Vietnam building standards, using Eurocodes as the basis, according to the tendency of International integration. The Vietnam building standards developed based on Eurocodes mentioned in the papers are: Eurocode 0 (Basis of structural design), Eurocode 1 (Actions on Structures), Eurocode 2 (Design of Concrete Structures), Eurocode 3 (Design of Steel Structures),Eurocode 6 (Design of Masonry Structures), Eurocode 7 (Geotechnical Design), Eurocode 8 (Design of Structures for Earthquake Resistance) and many other relevant Eurocodes. General principles for developing Vietnam building standards using Euroceds are also specified in the paper.

Solutions for improving the effectiveness of quality management of building structures (pp.6-8)

Eng. Cao Van Ha

In this paper, the author points out the weak points and their causes in respect of the quality management of building structures in Vietnam in different aspects such as: soil investigation, terrain surveying, design, estimation of quotation, construction and operation stages,.. and proposes the main solutions for improving the effectiveness of the quality management of building structures in Vietnam .

Some researched problems when developing the standard Design of seismic resistant building structures, TCVN 375:2006 (pp.9-16)

Prof. Dr Sc.Nguyen Dang Bich, Eng. Le khanh linh

This paper presents the problems that have to be solved when developing the Vietnam standard TCVN 375:2006: Design of seismic – resistant building structures on the basis of adoption of Eurocode 8, including: (1) seismic zoning map, (2) selection of the curvature of elastic response spectrum (type 1) and (3) the factor of importance of building structures.

The authors would also like to recommend that the standard TCVN 375:2006 contains many new and modern rules, specifications, and concepts so the user should be provided with a training course to understand thoroughly the standard before applying it to the calculation and design of seismic-resistant building structures.

The surveying engineering work in construction of tunnels (pp.17- 21)

Dr.Ngo van hoi

In this paper, the author presents the concepts of tunnels,the history of construction of tunnels in some countries all over the world and that in Vietnam . The author also presents methods for construction of tunnels and the important role of surveying engineering in construction of tunnels, from topography surveying for the design of the tunnel’s line to the monitoring of the tunnel’s deformation during putting the tunnel in to operation.

Fire tests for building materials and structural elements and their application to Vietnam (pp.22- 27)

MEng.hoang anh giang

This paper presents the necessity to perform the fire tests for building materials and structural elements and some opinions by the author on the ability to apply these fire tests to building material and structural elements in Vietnam for the purpose of fire safety of building structures.

Learning about the nature and the ability to improve the quality of traditional paint (pp.28-34)

Dr.Tran minh duc, Eng. bui thi nghi

When talking about traditional paint, people often thing of the wax from wax-tress only. In fact, traditional paint can be constituted from the wax and many other ingredients. Normally, there are two ingredients in traditional wax: asphalt vanish and oil-paint. Therefore, the properties of traditional paint depends much on the its compositions. This paper introduces a study on the nature of traditional paint and the ability to improve it.

Influence of the chloride concentration, humidity and thickness of concrete on the corrosion of steel reinforcement (pp.35-41)

Dr. hoang thi bich thuy, Eng. pham ngoc hieu

Vietnam is a humid tropical country with over 3,200km coastline which favours corrosion of metals. The number of marine steel and reinforced concrete structures, such as oil rigs, habours, piers, . . . is increasing more and more, especially in the very period of developing marine industries.

Reinforced concrete has been widely used for construction. However these structures gradually degrades due to corrosion of steel reinforcements induced by ingress of aggressive agents. Ingress of chloride from marine environment is the main cause of corrosion of steel in concrete which results in damages to the structures after a short time of operation.

This paper presents a study on the influence of chloride concentration, humidity and thickness of concrete cover on the corrosion of steel in concrete. Experiments were carried out with conditions similar to marine environment. The influence of above factors on the corrosion of steel reinforcment was studied by potentio-dynamic method, linear polarization in combination with observation of steel surface after testing period.

Geological information and possibility to use probability models for geological risk study (pp. 42- 45)

Dr. Sc. Tran Manh Lieu

This paper analyze the possibility to quantify geological information, the random nature and relative (inheritable) property of geological information and the possibility to use appropriate mathematical models (predetermination model, Markov and Bernuly chains) for evaluating, predicting geological risk and process.

Applying Monte-Carlo simulation for the construction schedule in Vietnam (pp.46- 52)

MEng.Lai Hai Dang,MEng.Luu Truong Van

The schedule delay is popular for various construction projects that cause considerable loss to project parties. It is widely accepted that construction project schedule plays a key role in project management due to its influence on the project success. Thus, it is important to quantify probabilities of project completion on time for improving project management. This paper describes that how Monte Carlo simulation (MCS) can be applied to simulate the construction schedule performance and to estimate the probability of project completion under uncertainty conditions. A flow chart was developed so as to run MCS for construction schedule of building projects. Triangle distribution tended to be appropriate for the probability distribution function (PDF) of construction activities. The new hospital of Medical University of HCM City was used as a case study to validate the model using applied software developed by authors.


[ Các bài liên quan ]
[ Các bài mới ]
[ Các bài đã đăng ]
Tin nổi bật

Tạp chí KHCN Xây dựng năm 2009
Tạp chí KHCN Xây dựng năm 2008
Tạp chí KHCN Xây dựng năm 2007
Tạp chí KHCN Xây dựng năm 2006
Tạp chí KHCN Xây dựng năm 2005

Danh mục tiêu chuẩn xây dựng thông dụng

Đón đọc Tạp chí KHCN Xây dựng số 2/2010

Quy định mẫu văn bản và hồ sơ kỹ thuật của Viện KHCN Xây dựng

Đặt mua, quảng cáo và thể lệ viết bài trên Tạp chí KHCN Xây dựng

TẠP CHÍ KHOA HỌC CÔNG NGHỆ XÂY DỰNG
(Building science and technology journal)

Tổng biên tập
(Editor-in-Chief)
PGS. TS.  Cao Duy Tiến
Viện trưởng viện KHCN XD


Trụ sở tòa soạn
(Editorial Office)
Viện KHCN Xây dựng
Nghĩa Tân-Cầu Giấy-Hà Nội
Điện thoại: 7556098; 7544196
Fax: 84.4. 8361197

Email:
vkhcnxd@fpt.vn


Giấy
phép số:
(Publication permit)
172/GP-BVHTT
ngày 24/4/2001

VIỆN KHOA HỌC CÔNG NGHỆ XÂY DỰNG
Vietnam Institute for Building Science and Technology (IBST)
Ðịa chỉ:  Nghĩa Tân - Cầu Giấy - Hà Nội
Ðiện thoại: 84.4.7544196  Fax: 84.4.8361197
E-mail:
ibst_vn@fpt.vn ; Website: www.ibst.vn

Được thiết kế bởi 3Csoft